UT-130 USB DVB-T 4-band (100~2600MHz, 2~8MHz BW) Receiver

Model No.
Made in
Request for Quotation

Key Features

UT-130 - Features

USB based demodulator with support for EN300-744 DVB-T reception.

No extra down converter needed, direct supportfor wide frequency range reception, including standard TV VHF/UHF (100MHz~950MHz)band, 1.2GHz band, and 2.4GHz band*.

Flexible channel bandwidth support, 2/3/4/5/6/7/8MHz

*Basically, full range (100MHz~2600MHz) issupported, except the pre-AMP LNA (MAX2644/MAX2691) performance may degrade insome bands.

Host Requirements

  • CPU: Intel, AMD, ARM, MIPS

  • 128MB RAM of system memory or above

  • Higher CPU and memory required if DVB-T audio/video decoding is needed

  • Oneavailable USB2.0 or 1.1 port
    Note: USB 1.1 can only support 3~5 Mbps stream data rate.



RF connector

Three 50-Ω SMA (female) connecters, for

1.      standard TV band 100MHz~950 MHz

2.      Lower band (< 1900MHz, 1.2G band)

3.      Upper band ( >=1900MHz, 2.4G band)

(IPEX on-board)


2/3/4/5/6/7/8 MHz


2K, 4K, 8K



Code rate

1/2, 2/3, 3/4, 5/6, 7/8

Guard interval

1/4, 1/8, 1/16 or 1/32

Frequency range


Lower band: 1100~1350MHz* (< 1900MHz)

Upper band: 2200~2600MHz* ( >=1900MHz)

RF-in Pmax

-10 dBm

(Recommended 2.4GHz < -15 dBm, 1.2GHz < -25 dBm)

USB port

USB 2.0 or USB 1.1


5V DC, USB bus power

177MHz: 460mA

666MHz: 480mA

1.2G:  500mA

2.4G:  470mA


Bare bone  82x 35mm

Box  W(105 mm) x D(75 mm) x H(35 mm)


  1. The frequencyrange is only for reference and not limited. Basically full range (100MHz~2.6GHz) is supported, but the pre-AMP LNA’s performance will be degraded inthe band out of the range specified.

  2. The frequencyrange is specified based on >10dB gain for the pre-AMP LNA.

Refer to thespecifications of the pre-AMP LNA Maxim MAX2644 / MAX2691 for furtherdetails.

Product Certification

Payment Details

  • Minimum Order:0
Other Products

Loading ...Shipping & Packaging
Loading ...Payment Terms
Loading ...Return Policy