LEFT MENU

DVB-T Digital Gap Filler/Repeater

Model No.
BR-101EH
Made in
Taiwan
Request for Quotation
 

    Spec

    • Height(cm):6
    • Length(cm):12
    • Weight(kg):.4
    • Width(cm):16

    Key Features

     
     

    Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission.
    TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition.
    Built-in 31-way PID filters and PCR re-stamp.
    Infinite digital TV signal extension can be achieved with BR-10.

    BR-101E supports EN 300-744 DVB-T while BR-101J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.






















    Parameter

    Value


    RF Connector



    Two 75-Ω MCX (female) connecters, one for Tx and one for Rx



    Bandwidth



    5/6/7/8 MHz



    FFT



    2K, 8K



    Code rate



    1/2, 2/3, 3/4, 5/6, 7/8



    Guard interval



    1/4, 1/8, 1/16 or 1/32



    Frequency range



    50 .. 950MHz



    VHF 6M BW/UHF 6M BW: Channel: CH7~CH83



    VHF 7M BW/UHF 7M BW: Channel: CH5~CH69



    VHF 8M BW/UHF 8M BW: Channel: CH5~CH69



    RF Output Level



    0 dBm (108 dBuV)



    Digital Attenuator



    Range:+6/-25dB* , Step size 1dB



    MER



    35dB Typically



    Spectrum Shoulder (Adjacent channel)

    45dB


    Phase noise

    < -92dBc @ 10kHz


    Carrier Suppression

    >42dB


    USB port



    USB 2.0 or USB 1.1



    Power



    5V DC (USB Bus Power)



    390mA (Tx and Rx)



    170mA(Rx only)



    340mA(Tx only)



    Dimensions (LxWxH)

    75x 30 x 15mm


    Note: There could be MER loss in high gain/attenuation level.

    Product Certification

    Other Products