LEFT MENU

BR-101JH ISDB-T/Tb Digital Gap Filler/Repeater(50~950Mhz and 1.2GHz Tx, 50~950Mhz Rx for HAM TV)

Model No.
BR-101JH
Made in
Taiwan
Request for Quotation
 

Key Features

BR-101 - Features

Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission.

TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition.

Built-in 31-way PID filters, Null packet insertion and PCR re-stamp.

Infinite digital TV signal extension can be achieved with BR-101.

BR-101E supports EN 300-744 DVB-T while BR-101J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.

BR-101EH/JH is a special edition of BR-101E for HAM TV application; BR-101EH Tx can support up to 1.2G band with high RF power (-18dBm), but 2’nd and 3’rd harmonic in 950MH~1350MHz band is not well filtered.


Demodulator (Receiver):

BR-101E supports Digital Terrestrial DVB-T Receptions (5/6/7/8 MHz bandwidth) and amateur HAM DVB-T TV reception (2/3/4 MHz bandwidth)

BR-101J supports Digital Terrestrial ISDB-T/ISDB-Tb Receptions (6/7 MHz bandwidth)

 

Modulator (Transmitter):

Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality

BR-101E supports configurable bandwidth from 2MHz to 8 MHz.

BR-101J supports configurable bandwidth 6/7/8 MHz.


Channel Adaptation:

The input and out channels are totally independent. The new (Tx) channel’s frequency, bandwidth, code rate, guard interval, FFT, constellation can be totally different from the original (Rx) one’s.

BuiltDirect digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality

If the input channel data rate is less than the output, auto null-packet insertion will be done in the modulator.

If the input channel data rate is larger, setting PID filter properly to filter out unwanted packets may avoid data overflow.

PCR re-stamp mechanism is supported to keep the correctness of PCR when PID’s filtered or null packets inserted.


BR-101 - Applications

DVB-T/ISDB-T digital TV signal repeater/extender

DVB-T/ISDB-T closed circuit TV gap filler

·      Air to Cable/Cable to Air/Air to Air/Cable to Cable TV signal repeater

Parameter

Value

RF connector

Tx: 75-Ω F (female) connecter

Rx: 75-Ω IEC (female) connecter

Bandwidth

Transmitter

BR-101EH

DVB-T

2/3/4/5/6/7/8 MHz

BR-101JH

ISDB-T/Tb

6/7/8 MHz

Receiver

BR-101EH

DVB-T

2/3/4 MHz or

5/6/7/8MHz *1

BR-101JH

ISDB-T/Tb

6/7 MHz

FFT

2K, 4K, 8K

Constellation

64QAM/16QAM/QPSK

Code rate

1/2, 2/3, 3/4, 5/6, 7/8

Guard interval

1/4, 1/8, 1/16 or 1/32

Frequency range

Transmitter

50~950MHz and 1200~1350MHz

step size 1KHz

Receiver

50~950MHz,  step size 1KHz

RF Output Level

-4 dBm (104 dBuV) @ 50~950MHz

BR-101E/J:-45dBm @ 1.2G band *2

BR-101EH:-18dBm @ 1.2G band

Digital Attenuator

Range:+6/-25dB*3 , Step size 1dB

MER

28~33 dB Typically @50~950MHz

25~30 dB Typically @1200~1350MHz

Spectrum Shoulder (Adjacent channel)

45dB

Phase noise

< -92dBc @ 10kHz

Carrier Suppression

>42dB

USB port

USB 2.0 or USB 1.1

Power

5V DC 390mA

Dimensions (LxWxH)

75x 30 x 15mm (excluding power adaptor)


Note:

*1 : Bandwidth 2/3/4 MHz or 5/6/7/8 MHz are selected by a jumper.

*2 :BR-101E/J U-band low pass filter is designed @950MHz, so 1.2G band power is filtered to such a low level.

*3:There could be MER loss in high gain/attenuation level.


Gap Filler Application:








Payment Details

  • Minimum Order:0
Other Products

Loading ...Shipping & Packaging
Loading ...Payment Terms
Loading ...Returns & Refunds